Ống mềm câu hỏi thường gặp liên quan

Không, TOYOSILICONE không được thiết kế cho hơi nước. Vòi TOYOSILICONE có thể chịu được áp suất lên đến 130 ℃ và 0,2 MPa, nhưng điều này nên được giới hạn trong khoảng thời gian ngắn cho mục đích khử trùng và nên tránh sử dụng liên tục. Ngoài ra, nhiệt độ và các điều kiện khác khác nhau tùy thuộc vào sản phẩm, vì vậy hãy nhớ kiểm tra vật liệu đề phòng để biết chi tiết.

This will not result in damage to the hose, though it may stick to the outside surface. We cannot, however, guarantee the TOYOSILICONE Hose for uses above 70℃.

Solutions of sodium hydroxide (caustic soda) should generally not be run through the TOYOSILICONE Hose as it can cause degradation of the hose. For CIP (cleaning in place), however, a dilution of 2 to 3% may be used without problems. The TOYOSILICONE has even been used by a CIP equipment manufacturer. Even so, this will result in quicker degradation than using water or air.

Do not use fuel oil in the TOYOFUSSO Hose Series.

We do not produce hoses that can be used with fuel oil.

Bán kính uốn tối thiểu là chiều dài từ tâm đến tâm của ống mềm.

Yes. It is made from polyethylene and is compliant with Japanese Food Sanitation Act Public Notice No. 201.

Certificates are made available for download by registering on our website.

In addition to SDS, material certificate, product specifications, Food Sanitation Act and FDA compliance certificate, we also offer catalog downloads and CAD drawing downloads.
Feel free to register.

*Some products may not be listed. In such case, feel free to contact us.

All hoses (standard products) are RoHS2 compatible. Survey reports are available if necessary.

Necessary survey reports can be downloaded by registering as a member. Feel free to use them as needed.

There are several types of hoses complying with the Food Sanitation Act. Select a hose that meets the operating conditions.

In addition to the Food Sanitation Act, there are hoses suitable for FDA and other legal regulations.

If a normal PVC resin hose is used with food, hot water and cleaning agents at 60℃ or higher, the hose will harden, which may lead to problems such as leakage and disconnection of the hose coupling.

Depending on the pressure of food, hot water, etc., we offer hoses according to applications and usage conditions such as those that can be used up to 70℃ and 150℃.

Select a hose that meets the operating conditions.

There are various types of hoses.
Hoses used in factories are roughly divided into hoses reinforced with thread and those reinforced with metal or resin coils.
If the currently used hose is reinforced with thread, the hose may bend or collapse.

It is possible to minimize bending and collapsing by using a hose reinforced with a metal or resin coil.
These reinforced hoses are resistant to bending and collapsing and can be used for vacuum applications.

In addition, there are hoses with a new structure that’s not reinforced with a metal or resin coil and is resistant against bending and collapsing.

No service life is set for our hoses. Since many usage conditions such as fluid type, operating temperature, operating pressure, hose size and length are involved and the hoses are used in a wide variety of environments, it is not possible to set a specific service life.

Make arrangements based on the actual piping conditions at your company.

No. It is neither fire resistance nor flame retardant.

The reinforcing material of the TOYOFOODS-S Hose is made of hard iron wire that’s prone to rusting. Avoiding wetting the ends while using the hose.

Contact us for products that use a rust resistant reinforcing material.

Smaller minimum bending radius doesn’t necessarily mean it is softer.

Although it is a measure of softness, it is not absolute. For example, the bend radius is TOYOSPRING < TOYORON, but in this case TOYORON feels softer. The softness varies depending on the thickness, material and reinforcement structure. Select an appropriate hose with reference to the deflection data and product samples.

Yes, depending on lead times and quantities, we do our best to provide custom lengths. Please note that prices may differ. Consult with your local dealer for details.

Select a low-odor hose that meets the operating conditions.

The hoses are available in PVC, polyolefin resin, silicone rubber and fluorine resin, and can be selected according to the odor level, intended use and conditions.

Ground clips are not hose bands. Be sure to use hose bands.

Refer to the attachment for the installation method of the ground clip.

The cutting method will differ depending on the thickness and type of the hose.
We demonstrate some of the various methods and tools in our video “How to Cut a Toyox Hose.”

In order to provide products suitable for the usage conditions, etc., we provide samples upon confirming the usage conditions.

Note that samples may not be available depending on the conditions.

Many of our dealers will cut hoses to the desired length. Please consult with your local dealer for available sizes and pricing.