KAMLOK câu hỏi thường gặp liên quan

KAMLOK

Quy định

QIs the KAMLOK compatible with RoHS2?

All KAMLOK except for bronze models are compatible with RoHS2. Survey reports are available if necessary.
Necessary survey reports can be downloaded by registering as a member. Feel free to use them as needed.

QAre certificates such as SDS and material certificate provided?

Certificates are made available for download by registering on our website.

In addition to SDS, material certificate, product specifications, Food Sanitation Act and FDA compliance certificate, we also offer catalog downloads and CAD drawing downloads.
Feel free to register.

*Some products may not be listed. In such case, feel free to contact us.

Các loại / Dòng đầy đủ

QAre there any products such as lids to prevent foreign matter from entering into the KAMLOK couplings?

For each material, Dust Cap 634-B is available for couplers and Plug Cap 634-A for adapters.
However, they cannot be used in applications where pressure is applied or to prevent leakage. It is only for protection from dust and foreign matter.

QDoes KAMLOK have couplings with different diameters to reduce the size?

KAMLOK does not have couplings with different diameters.

There should be a method of adjusting and installing using general different-diameter bushings or the like in the thread part.

Q633-A, 633-F, 633-B and 633-D engraved on the KAMLOK body don’t have products with the same part number in the catalog or website. Are they discontinued?

These engravings are old type. The stamps are currently the same for those made of bronze.
The current product engravings and part numbers are as follows.

kamlok_obsolete

Kết nối

QIs the KAMLOK compatible with lever type coupling made by other companies?

MIL standard lever type couplings and KAMLOK are compatible. However, the gasket specifications are different between companies. Our warranty only covers fittings and gaskets of the same manufacturer. Make sure that the size and material are the same.

QIs it okay to connect two KAMLOK made of different materials? For example, is it safe to connect an aluminum KAMLOK with a stainless steel one?

Connect with KAMLOK of the same material. Problems may occur due to electrical corrosion or wear.

QI tried to insert a KAMLOK hose shank into a common suction hose, but it was difficult. Is there a good way to insert it?

There are methods such as warming the hose insertion part with warm water and applying soap water to the hose shank. Also, it is possible to change the 633-CT coupler and 633-ET adapter with a slightly narrower hose shank.

QIs KAMLOK available in NPT thread type?

We do not carry NPT thread type.
All products are PT thread type.

QIs KAMLOK adapter 633-AB-3/4 available with a different thread diameter of 1/2?

The KAMLOK adapter 633-AB-1/2 has internal thread diameter of 1/2.
Only KAMLOK 1/2 and 3/4 have the same fitting size, and available screw standards are 1/2 and 3/4.
*Except products made of PP

The same applies to 633-FB.

Xem thêm

Thông số kỹ thuật

QWhat is the difference between KAMLOK 633-C and 633-CT, 633-E and 633-ET?

The difference between KAMLOK 633-C and 633-CT is the difference in the outer diameter of the shank where the hose is inserted. 633-CT is narrower than the 633-C and is used to be inserted into hoses that do not easily expand, such as suction hoses in general.
If the size does not match, fluid leakage or coupling disconnection may occur. The same applies to 633-E and 633-ET.
Use 633-E or 633-C for our hoses.

QWhat kind of coupling is KAMLOK?

KAMLOK is a coupling composed of male (adapter) and female (coupler) that can be easily attached and detached by tightening or loosening the lever (arm).
KAMLOK is available in types that connect to hoses, devices, equipment and piping materials.
Also, aluminum alloy, stainless steel, bronze and polypropylene (PP) types are available to meet various applications, fluids and usage conditions.

kamlok

Miếng đệm

QCan the gasket be replaced? Is it also possible to replace the gaskets specified at the time of purchase?

Gaskets are consumable items. They can be replaced by the customer.

It is also possible to replace with the gasket specified at the time of purchase. Specify when making order.

QI want to learn how to install the KAMLOK gasket. I’m trying to install a Teflon jacket gasket, but it’s tight on the side. Is it safe to push it in?

Forcibly inserting it may cause streaks and deformation in the Teflon part, which may cause leakage.
To install the gasket, immerse it in hot water at 80℃ for 10-15 seconds (increasing flexibility) and firmly insert the gasket diagonally along the streaks (including the filler part).
When purchasing a new product, gasket replacement can also be provided, so consult with the supplier.